About M10 Ready Mix Concrete
M10 Ready Mix Concrete (characteristic compressive strength 10 N/mm² at 28 days) is a lean mix concrete used for non-structural applications. Produced in a batching plant with controlled water-cement ratio and weighed proportions, M10 RMC is the standard grade for PCC (Plain Cement Concrete) base courses, levelling courses under foundations, blinding layers, and non-structural filling — where concrete is needed as a filler or levelling medium without structural load-bearing requirements.
Delivered by transit mixer to your construction site across Chennai, Chengalpattu, Kanchipuram, Thiruvallur, and all of Tamil Nadu. Minimum order 3 m³. GST invoice on every pour.
Applications
PCC Base
Foundation base & blinding
Levelling Course
Under-slab levelling
Pathways
Light garden & walkway
Trench Fill
Non-structural trench fill
Lean Mix
Lean concrete fill
Mix Design Parameters (ISI:456)
| Grade | M10 |
| Characteristic Strength | 10 N/mm² (10 MPa) at 28 days |
| Standard | ISI:456 |
| Mix Designation | Nominal Mix 1:3:6 |
| Cement Content (Min) | 210 kg/m³ |
| Water-Cement Ratio (Max) | 0.60 |
| Slump Range | 75 – 100 mm (standard) |
| Aggregate Size | 20mm MSA |
| Application Type | Plain Cement Concrete (PCC) — Non-structural |
| Minimum Order | 3 m³ (transit mixer load) |
Why Choose RMC M10?
- ✓Batching plant controlled — consistent mix every pour
- ✓Saves site labour for manual mixing of PCC
- ✓Correct water-cement ratio — no site water addition needed
- ✓ISI:456 compliant — accepted for all PCC applications
- ✓Fast pouring — reduces project timeline
Important Notes
⚠️ M10 is for non-structural PCC only. For RCC foundations, columns, slabs, and beams, use M20 or higher. Using M10 for structural RCC is a code violation.